⟁ Kentucky Well Data field records · 2026 survey

Kentucky Well Data › Todd County › Allensville (42204)

Allensville, KY (42204): well depth, water level & drilling cost

✓ 78 KGS/DOW records · Todd County

127 ftmedian well depth
109 ft–150 fttypical depth range
55 ftmedian static water level
—median yield (— tests)

Pull every recorded well near a Allensville (42204) address — $49

How deep are wells in and around Allensville (42204), Kentucky?

The median drilled well depth in and around Allensville (42204) is 127 ft, based on 32 wells with recorded depths in the state KGS/DOW database. Half fall between 109 ft and 150 ft; 90% are shallower than 183 ft.

How much does it cost to drill a well in and around Allensville (42204)?

Applying published per-foot rates to the local median depth of 127 ft: drilling and casing alone typically runs $3,175–$8,255; a complete system including pump, pressure tank, and hookup typically runs $7,620–$12,700. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Allensville (42204)?

The median static water level is 55 ft below ground surface (middle half of wells: 44 ft–66 ft), from 15 measurements.

Drilled depth distribution

0–50 ft 1 50–100 ft 4 100–150 ft 18 150–200 ft 6 200–300 ft 3 300–400 ft 0 400–600 ft 0 600+ ft 0
Looking at a specific property in Allensville (42204)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Allensville (42204)

Free. Goes to licensed drillers working Todd County.

Part of Todd County well records.

Method: medians computed from KGS/DOW records (Kentucky groundwater repository water wells (the state's own W-type split — monitoring wells are a separate file and never counted); depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.