Kentucky Well Data › Marshall County › Gilbertsville (42044)
Gilbertsville, KY (42044): well depth, water level & drilling cost
✓ 148 KGS/DOW records · Marshall County
Pull every recorded well near a Gilbertsville (42044) address — $49
How deep are wells in and around Gilbertsville (42044), Kentucky?
The median drilled well depth in and around Gilbertsville (42044) is 145 ft, based on 74 wells with recorded depths in the state KGS/DOW database. Half fall between 101 ft and 227 ft; 90% are shallower than 314 ft.
How much does it cost to drill a well in and around Gilbertsville (42044)?
Applying published per-foot rates to the local median depth of 145 ft: drilling and casing alone typically runs $3,625–$9,425; a complete system including pump, pressure tank, and hookup typically runs $8,700–$14,500. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Gilbertsville (42044)?
The median static water level is 42 ft below ground surface (middle half of wells: 30 ft–69 ft), from 63 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Marshall County.
Part of Marshall County well records.
Method: medians computed from KGS/DOW records (Kentucky groundwater repository water wells (the state's own W-type split — monitoring wells are a separate file and never counted); depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.